Login |
Main Gallery » Projects » 2510p SATA caddy » Installing WinXP from a USB drive. Set Bios or boot menu to boot from USB-HDD first.

Actions

2510p SATA caddy

1. Package... ... 24. Bottom gap ... 25. Close up of... 26. Caddy front... 27. Installing ... 28. WinXP... 29. IMG_7387 30. IMG_7388 ... 50. WD3200BEKT_...
 
 
 
Installing WinXP from a USB drive. Set Bios or boot menu to boot from USB-HDD first.
 
 
Top and rear metal plates from caddy removed to expose LED and connector. This is the top side view. Bottom view of caddy circuit board. Top view of caddy circuit board displaying Marvel PATA to SATA chip.
2510p bios shot of installed caddy being recognized as a "Notebook Multibay" device. Bottom gap between caddy faceplate and 2510p chasis Close up of gap
Caddy front plate. Non-angled front plate on bottom right which is not flush with 2510p chasis. Installing WinXP from a USB drive. Set Bios or boot menu to boot from USB-HDD first. WinXP set-up correctly displaying 320GB HDD device
IMG_7387 IMG_7388 IMG_7389
isolate_pin_47 OCZ Vertex 60GB AS -master- OCZ Vertex 60GB ATTO -master- nopwrsav

Installing WinXP from a USB drive. Set Bios or boot menu to boot from USB-HDD first.

Date: 07/18/2009
80 KB

Exif
Powered by Gallery v2.3