Login |
Main Gallery » Projects » 2510p SATA caddy » Close up of gap

Actions

2510p SATA caddy

1. Package... ... 22. Top view of... 23. 2510p bios ... 24. Bottom gap ... 25. Close up of... 26. Caddy front... 27. Installing ... 28. WinXP... ... 50. WD3200BEKT_...
 
 
 
Close up of gap
 
 
Caddy metal guide that needs to be removed so caddy will fit. Metal guide removed after unscrewing 2 screws Top and rear metal plates from caddy removed to expose LED and connector. This is the top side view.
Bottom view of caddy circuit board. Top view of caddy circuit board displaying Marvel PATA to SATA chip. 2510p bios shot of installed caddy being recognized as a "Notebook Multibay" device.
Bottom gap between caddy faceplate and 2510p chasis Close up of gap Caddy front plate. Non-angled front plate on bottom right which is not flush with 2510p chasis.
Installing WinXP from a USB drive. Set Bios or boot menu to boot from USB-HDD first. WinXP set-up correctly displaying 320GB HDD device IMG_7387
IMG_7388 IMG_7389 isolate_pin_47

Close up of gap

Date: 07/18/2009
74 KB

Exif

Powered by Gallery v2.3