Login |
Main Gallery » Projects » 2510p SATA caddy » Close-up of the correct 2510p PATA connector below. DVD optical drive above.

Actions

2510p SATA caddy

1. Package... ... 12. Remove 2... 13. Close-up of... 14. PATA... 15. Close-up of... 16. DVD side... 17. DVD rear... 18. Caddy metal... ... 50. WD3200BEKT_...
 
 
 
Close-up of the correct 2510p PATA connector below. DVD optical drive above.
 
 
-7.7W power consumption using original 1.8 ZIF HDD. Using http://pocketgeek.pgnet.us/BatteryStatus.exe program. Caddy and HDD side-by-side WD Scorpio Black 320GB installed in caddy
Caddy next to 2510p DVD optical drive Remove 2 torqx screws from the 2510p and slide out the optical drive. Close-up of original caddy PATA connector. Remove 2 screw and pull off board to expose the required 2510p connector.
PATA connector board removed from caddy Close-up of the correct 2510p PATA connector below. DVD optical drive above. DVD side screw bracket that needs to be transfered to caddy
DVD rear screw bracket that needs to be transfered to caddy Caddy metal guide that needs to be removed so caddy will fit. Metal guide removed after unscrewing 2 screws
Top and rear metal plates from caddy removed to expose LED and connector. This is the top side view. Bottom view of caddy circuit board. Top view of caddy circuit board displaying Marvel PATA to SATA chip.

Close-up of the correct 2510p PATA connector below. DVD optical drive above.

Date: 07/18/2009
70 KB

Exif
Powered by Gallery v2.3