Login |
Main Gallery » Projects » 2510p SATA caddy » PATA connector board removed from caddy

Actions

2510p SATA caddy

1. Package... ... 11. Caddy next ... 12. Remove 2... 13. Close-up of... 14. PATA... 15. Close-up of... 16. DVD side... 17. DVD rear... ... 50. WD3200BEKT_...
 
 
 
PATA connector board removed from caddy
 
 
Western Digital Scorpio Black 320GB 7200 rpm 16 MB cache 2.5" HDD -7.7W power consumption using original 1.8 ZIF HDD. Using http://pocketgeek.pgnet.us/BatteryStatus.exe program. Caddy and HDD side-by-side
WD Scorpio Black 320GB installed in caddy Caddy next to 2510p DVD optical drive Remove 2 torqx screws from the 2510p and slide out the optical drive.
Close-up of original caddy PATA connector. Remove 2 screw and pull off board to expose the required 2510p connector. PATA connector board removed from caddy Close-up of the correct 2510p PATA connector below. DVD optical drive above.
DVD side screw bracket that needs to be transfered to caddy DVD rear screw bracket that needs to be transfered to caddy Caddy metal guide that needs to be removed so caddy will fit.
Metal guide removed after unscrewing 2 screws Top and rear metal plates from caddy removed to expose LED and connector. This is the top side view. Bottom view of caddy circuit board.

PATA connector board removed from caddy

Date: 07/18/2009
79 KB

Exif
Powered by Gallery v2.3