Login |
Main Gallery » Projects » 2510p SATA caddy » Remove 2 torqx screws from the 2510p and slide out the optical drive.

Actions

2510p SATA caddy

1. Package... ... 9. Caddy and... 10. WD Scorpio ... 11. Caddy next ... 12. Remove 2... 13. Close-up of... 14. PATA... 15. Close-up of... ... 50. WD3200BEKT_...
 
 
 
Remove 2 torqx screws from the 2510p and slide out the optical drive.
 
 
Original PATA connector. This needs to be removed to expose the correct connector for the 2510p SATA connector inside drive bay Western Digital Scorpio Black 320GB 7200 rpm 16 MB cache 2.5" HDD
-7.7W power consumption using original 1.8 ZIF HDD. Using http://pocketgeek.pgnet.us/BatteryStatus.exe program. Caddy and HDD side-by-side WD Scorpio Black 320GB installed in caddy
Caddy next to 2510p DVD optical drive Remove 2 torqx screws from the 2510p and slide out the optical drive. Close-up of original caddy PATA connector. Remove 2 screw and pull off board to expose the required 2510p connector.
PATA connector board removed from caddy Close-up of the correct 2510p PATA connector below. DVD optical drive above. DVD side screw bracket that needs to be transfered to caddy
DVD rear screw bracket that needs to be transfered to caddy Caddy metal guide that needs to be removed so caddy will fit. Metal guide removed after unscrewing 2 screws

Remove 2 torqx screws from the 2510p and slide out the optical drive.

Date: 07/18/2009
155 KB

Exif
Powered by Gallery v2.3